Through with " Vision Systems Design " and " Inspect " the magazine cooperates, the development trend that German FRAMOS company is aimed at technology of industrial watch for a chance, interface and prospective development did a market research. In this investigation and study, 52 users and 8 manufacturer accepted investigation to visit, among them of 55% suffer visit a company to come from Europe, 23% come from North America and South America, 22% come from an Asia / middle east, the VISION2016 that holds in Situjiate announced survey result on congress. Europe is being purchased and producer face all is ranked the first, it is respectively hold 62% with the market share of 43% . Manufacturer still is in Asia (13% ) with the United States (6% ) production. The platoon is after Europe, asia and United States are had likewise driving purchase the market, each held the market share of 28% . With compared 2015, the United States drops in the market share of crop respect 28% , the factory quotient that this also may get North America and South America participate in investigation measures less impact. Camera manufacturer represents, from the point of the angle of sale, measure and content shedding is held respectively 50% with the market share of 13% ; Manufacturing automation and quality make sure application held the market share of 63% severally; Medical treatment is diagnosed and science application also held the market share of 38% respectively. Come from the investigation data of user of industrial watch for a chance, also showed similar result: The camera of 48% is used at automation domain, 46% use at quality to assure to apply, 40% use at measuring a domain, 29% use at science application. 10% what medical treatment diagnoses application to occupy user camera deploy. Traffic application (include traffic support system) to manufacturer also be a main market, but to the user, the value of this market is not strong. Like in former years, camera manufacturer and systematic development business saw image processing and machine vision trade grow continuously, the user of 90% plans to be rolled out inside two years or replace existing facility in future. The camera price production to the medium-priced industry watch for a chance between 150-650 dollar scale, in the manufacturing route chart of manufacturer, already from 2014 was as high as 70% to drop steadily 44% , what this shows the price is in a few years before the course is successive after gliding, had stabilized relatively. The low cost camera under 150 dollars, of the manufacturing scale of manufacturer and user purchase scale to be respectively 26% with 11% , value is relatively inferior. With compared 2015, costly camera from 650 dollars / 1000 dollars / 3000 dollars fell 12 percent (see a picture 1) . Accordingly, manufacturer of small-sized to camera, produce in the light of specific application custom-built turn watch for a chance, it is one sells dot and market dominant position strong it seems that. Graph 1: In fact, the price exceeds the sales volume of the camera of 1000 dollars, 20% what occupy camera total sales almost, this showed a lot of application fields are right the driving demand of high-end camera. Because photograph comparing of CMOS and CCD alls alone the Buddhist nun stops to produce CCD image sensor, make the tremendous growth that the user witnessed the company outstanding achievement such as company of An Sen beautiful semiconductor, at present Ansenmei is in of this market have rate for 29% . In the research last year, suo Ni user and manufacturer anticipate medium be on the wane did not come true, the camera manufacturer that still has 32% at present relies on Suo Ni. In two years of future, its proclaim return of Suo Ni hopeful the market share level before stop production CCD: 37% . Compare 2015, more users chose Suo Ni 2016, user scale arrived from the 35% promotion 2015 53% 2016. Camera manufacturer points out, 85% what CMOS technology holds camera sale. Camera user hopeful achieves this two years to purchase a level in future. Today, the user that has 51% uses CMOS, but predict this one scale will grow 83% very quickly. As CCD technology be replaced gradually, e2v will make trade from photograph mechanism (from 3%~12% ) with custom-built sensor (from 4%~19% ) this two respects are benefited, these two markets were shown likewise active forecast. 2015, the user that has 30% about is used 1 million like the sensor under element, however this scale dropped to have 10% only 2016. 1 million sensor resembling element drops of use quantity significantly, bring about 100~300 10 thousand products resembling element (grow 10% ) , 300~500 10 thousand products resembling element (grow 2% ) with 500~1000 10 thousand products resembling element (grow 3% ) dosage grows. In future two years, manufacturer and user hopeful put application in frame to lead the application between 25~60fps to go up mainly. Meanwhile, compare 2015, frame rate exceeds 100fps (face an user: Grow 13% ) with 200fps (face manufacturer: Grow 14% ) application begins to increase significantly. Graph 2: In the system in compositive business, gigE Vision standard is the most welcome, it is Camera Link and USB 3 next. Standard interface comes from the investigation data of camera manufacturer to show, gigE Vision is current the most welcome interface standard (33% ) , it is aether net next (15% ) . With compared 2015, be based on the United States to share the reason with inferior scale, the use proportion that holds compared Ethernet interface level high before is in drop. Camera manufacturer and user predict, USB3. 0 will welcome the rapiddest growth with GigEVision, market increase rate parts with 8% with 10% . Nowadays, the manufacturer of more than 75% and the user of 60% think, the bandwidth with taller even 5GB becomes crucial. To the interface choice of high speed application, build the feedback of business from photograph mechanism first: The manufacturer of 50% thinks, USB 3.
1 it is the most important interface that high speed application needs; The manufacturer of 38% considers as 10GigE the good choice that is high speed application. Will look again see the feedback that comes from an user: The user support of 44% realizes high speed to transmit through 10GigE; And support passes USB3.
The user scale that 1 implementation high speed transmits is 37% . CNC Milling