Whorl clamping apparatus

  • Time:
  • Click:283
  • source:GERHOLD CNC Machining
In turning treatment, often encountering one aspect of the matter is the whorl with good treatment, another end needs the work of rework, if use whorl to locate clamp, turning other one aspect of the matter, below the action of cutting force, after turning is over, work is bad debus, if use the clamping apparatus of article introduction, the debus workpiece that can go to the lavatory. 1.

Chuck 2.

Nut 3.

Awl is sold 4.

Link stopper 5.

Graph of workpiece clamping apparatus is in turning treatment, often encountering one aspect of the matter is the whorl with good treatment, another end needs the work of rework, if use whorl to locate clamp, turning other one aspect of the matter, below the action of cutting force, after turning is over, work is bad debus, if use the clamping apparatus that plan institute shows, the debus workpiece that can go to the lavatory. When using, sell awl first in inserting nut and link stopper, make link stopper axial is secured. Come back workpiece next in nut, very as close as link stopper, after waiting for workpiece to be machined, sell awl exit, make the top pressure of link stopper and workpiece can be eliminated, workpiece but lightly and debus. CNC Milling